Viking K600F Night Bell Over Paging Adapter

Features:

• Powered by ring signal – no external power supply required
• Provides tone over existing paging amplifiers
• Terminals for automatic switching between paging audio and warble tone
• Auxiliary relay contacts provided
• Connects directly to ringing analog PABX/KSU stations with RJ11 or terminals
• Floating 600 ohm audio output
• LED indication of unit activation

Specifications:

• Power: Phone line powered
• Ring Voltage: 40VAC / 20Hz minimum
• Ringer Equivalence: 1.0A REN
• Dimensions: 114mm x 76mm x 38mm (4.5” x 3.0” x 1.5”)
• Environmental: 0 C to 32 C (32 F to 90 F) with 5% to 95% non-condensing humidity
• Audio Output: Floating 600W, <0.5Vpp
• Maximum Audio Cable Run: 15.24m (50 ft)
• Relay Contact Ratings: 0.5A @ 125VAC / 1A @ 30VDC
• Connections: (1) RJ11 jack and 10 position screw terminal strip

Part Number: K-600F

*** The K-600F replaces the K-600D Night Bell Over Paging Adapter ***

Viking K-600F Night Bell Over Paging Adapter

The K-600F eliminates the installation of multiple bells, relays, and power supplies, wherever night bells, loud ringing, or emergency tones are required. The K-600F provides an existing paging amplifier with a pleasant electronic warble tone each time it receives ring voltage from an analog PABX/KSU extension.

The K-600F requires no external power supply and provides a floating 600 ohm audio output. Paging In and Out terminals are provided to allow automatic switching between paging and warble audio when used with an existing paging installation. A set of N.O. / N.C. relay contacts are provided that switch in cadence with the ring signal. Volume and tone controls are also provided.

Viking K-600F Night Bell Over Paging Adapter Technical Information